|
|
Industrial refrigeration technology
Industrial chillers are typically packaged as a complete closed-loop system, including hot and cold water units, condensers and circulating pumps, expansion valves, no flow shut-off, internal cold water tanks, and temperature control stations. Internal tanks help maintain cold water temperature and prevent temperature spikes. Closed loop industrial chillers recycle water cooling equipment and instruments at constant temperature and pressure, increasing stability and repeatability with additives or clean water. Cooling of water flow to the application angle and back.www.jiashengsz.com
If the temperature difference between the inlet and outlet is high, a large external water tank will be used to store cold water. In this case, the cooling water will not directly flow from the application of the cooler, and will penetrate into the external part of the water tank as a "temperature buffering sorting behavior. The cold water tank is much larger than the internal water tank. Cold water can be traced back to the external fuel tank from the application of the external fuel tank and hot water can be returned from the application of the external fuel tank, rather than to the unit.
The less common open loop control of industrial refrigerators in an open tank or oil pan continuously circulates the temperature of the liquid. The liquid comes from the tank, passes through the pump unit, and returns to the tank. An adjustable constant temperature sensory makeup liquid with a circulating cooler to maintain a constant temperature in the tank.
One of the new developments in industrial chillers is air cooling, rather than the use of cooling water. In this case, the condenser does not cool with hot air refrigerant, but uses a cooling tower cooled by cooling water. This development allows for over 15% and allows for a significant reduction in energy demand due to the small area of surface water in coolers, condensers, and fans. In addition, significantly reduce noise levels with the permission of fans.
Most industrial chillers use cooling media for cooling, but some simple technologies that rely on air or water include cooling coil flow that regulates temperature. Water is the most commonly used coolant in the freezing process, although cooling mixtures (mainly with coolant additives to enhance heat dissipation) are often used.
|
| 〖Close Page〗 |
|
1688 shop 
Weibo 
Technical Info